Care, lifespan & warranty of swimwear

Swimwear for sports swimming is used intensively. Water, chlorine or salt, friction and body substances all affect the fabric and its elasticity. That’s why proper care is important, as is knowing what to expect from the lifespan of your swimwear. On this page, we explain how to care for your swimwear, how long it typically lasts and how warranty claims are assessed.

Caring for swimwear

Proper care helps you enjoy your swimwear for as long as possible.

After each use

Always rinse your swimwear at home under cold tap water. This removes chlorine, salt and body substances. Gently squeeze out the water and do not wring the fabric.

Drying

Allow your swimwear to air-dry in a warm room.

Do not dry swimwear:

• in direct sunlight
• over or on a radiator
• in the tumble dryer
  
  

Heat damages the fabric and its elasticity, shortening its lifespan.

Washing swimwear

Washing is usually not necessary and should only be done when really needed.

• Do not wash swimwear in the washing machine
• Always wash by hand
• Use lukewarm water
• Use a mild, non-aggressive detergent
• Do not use bleach or strong cleaning products
  
  

Rinse the swimwear thoroughly after washing and allow it to air-dry again.

Usage tips

With the right use, your swimwear will stay in good condition for longer.

• Put swimwear on carefully and avoid sharp fingernails
• Avoid friction against rough surfaces such as pool edges and starting blocks
• Do not use sports swimwear on water slides or in hot tubs
• Do not wear swimwear underneath ordinary clothing
• Do not leave wet swimwear in a bag or towel for long periods
• Alternate your swimwear if you swim several times a week
  
  

Lifespan of swimwear

Swimwear is made from elastic materials suitable for swimming, but these materials are sensitive to external influences.

With sporting use, the average lifespan is approximately 3 months to 1 year. This depends, among other things, on:

• how often you swim
• the type of water (chlorine or salt)
• how thoroughly you rinse the swimwear
• how you dry and store the swimwear
• the amount of friction during wear
  
  

Lifespan of water polo swimwear

Water polo is a contact sport in which swimwear is pulled firmly during training and matches. As a result, the fabric and seams are under constant strain.

The lifespan of water polo swimwear is therefore often shorter than that of regular swimwear. Wear caused by pulling, stretching and tearing is part of the sport and cannot be completely prevented, even with proper care.

Normal wear and tear

The following types of wear and tear may occur with normal use:

• pilling (small bobbles on the fabric)
• thinning of the fabric, sometimes visible as lighter patches
• discolouration caused by water, sunlight, sun cream or body substances
• prints coming loose or fading
  
  

These types of wear and tear are normal and are part of using the product.

Warranty

Swimwear is a product for regular use and comes with a limited warranty.

The warranty covers:

• clear manufacturing defects
• problems visible immediately upon first use

The warranty does not cover:

• normal wear and tear
• discolouration or pilling
• thinning of the fabric
• damage caused by pulling or tearing during water polo
• damage caused by incorrect use
• damage caused by inadequate care
  
  

When assessing a warranty claim, we consider the age of the product, the condition of the swimwear and how it has been used and cared for.

By caring for your swimwear properly and using it in the right way, you can extend its lifespan and enjoy your product for longer. Wear and tear is normal with sporting use and is part of the product. This information helps set clear expectations and answer questions about care, lifespan and warranty.

Care, lifespan & warranty of swimming goggles

Swimming goggles are used intensively and come directly into contact with water, chlorine or salt, sunlight and changes in temperature. The fit, as well as how the goggles are used and stored, also affects how long they continue to work properly. On this page, you’ll find out how to care for your swimming goggles, what to expect from their lifespan and how warranty claims are assessed.

Caring for swimming goggles

After each use

• Always rinse your swimming goggles at home under cold tap water
• Rinse only the outside of the lenses and frame
• Try to keep the inside of the lenses dry
• This removes chlorine, salt and dirt
• Gently shake excess water from the goggles
• Touch the inside of the lenses as little as possible to protect the coating

Drying

• Allow the swimming goggles to air-dry
• Place the goggles down or hang them up so the lenses can dry freely

Do not leave swimming goggles:

• to dry in direct sunlight
• on or beside a radiator
• wet in a closed bag

Heat and prolonged moisture can damage the lenses, coating and seal.

Storing swimming goggles

• Where possible, store your swimming goggles in a protective goggle case
• Make sure the seal is not compressed
• Do not place heavy items on the swimming goggles
• Do not leave the swimming goggles loose in a bag

This helps prevent scratches and deformation.

Usage tips

• Do not wear the swimming goggles too tightly; a good fit seals without excessive tension
• Do not pull hard on the straps or nose bridge
• Do not throw the swimming goggles onto the pool edge or floor
• Use only water or suitable sprays on the lenses
• Do not rub the inside of the lens

If your swimming goggles start to fog up:

• Do not throw them away straight away
• An anti-fog spray can often be used to apply a new layer
• The effect of anti-fog spray is temporary
• An anti-fog spray will not fully restore the original coating
• How long the effect lasts depends on use and care

If swimming goggles leak:

• This is usually caused by a fit that does not seal properly against the face
• This is not a fault with the swimming goggles

Lifespan of swimming goggles

Swimming goggles are technical products made up of several parts, including lenses, a seal, straps and adjustment systems.

With normal sporting use, the average lifespan is approximately 3 months to 1 year. This depends on:

• how often you swim
• how the swimming goggles are cared for
• how the swimming goggles are stored
• exposure to sunlight and heat

Over time, the seal may become less effective or the coating may work less well. This is part of normal use.

Normal wear and tear

The following types of wear and tear may occur with normal use:

• scratches on the lenses
• reduced coating performance
• stretched straps
• slight discolouration of components

These signs are normal and are part of using the product.

Warranty

Swimming goggles are products for regular use and come with a limited warranty.

The warranty covers:

• clear manufacturing defects
• problems visible immediately upon first use
• a non-functioning adjustment system
• lenses coming loose
• a faulty coating
• a broken frame

The warranty does not cover:

• normal wear and tear, such as scratches on the lens
• leaks caused by an unsuitable fit
• damage caused by careless use
• damage caused by incorrect storage
• problems caused by rubbing the lens
• damage caused by exposure to heat

When assessing a warranty claim, we consider the age of the swimming goggles, the condition of the product and how it has been used and cared for.

Care, lifespan & warranty of competition suits

Competition suits are technical swim products designed to support performance during races. They are made from special materials that support compression, hydrodynamics and freedom of movement. These suits are not intended for daily or prolonged use. How you use, put on and care for a competition suit has a major effect on its lifespan. Below, you’ll find information about the purpose of competition suits, how to use and care for them, what to expect from their lifespan and how warranty claims are assessed.

Purpose of competition suits

Competition suits are designed to support performance during races.

• Reduce water resistance
• Provide compression for a streamlined position
• Support the muscles during maximum effort
• Designed for races and selected occasions, not training

A competition suit is not a substitute for technique and is not intended to be worn frequently or for long periods.

Caring for competition suits

After each use

• Always rinse the competition suit at home under cold tap water
• Rinse the suit thoroughly to remove chlorine, salt and body substances
• Gently squeeze out the water
• Do not wring or twist the suit

Drying

• Lay the competition suit flat or hang it up carefully
• Allow the suit to air-dry in a warm room

Do not leave a competition suit:

• to dry in direct sunlight
• on or beside a radiator
• in the tumble dryer
• wet in a closed bag

Heat and prolonged moisture damage the fabric, bonded seams and elasticity.

Washing competition suits

Washing is generally not necessary.

• Do not wash a competition suit in the washing machine
• Only wash by hand if it is really necessary
• Use cold to lukewarm water
• Use a mild, non-aggressive detergent
• Do not use fabric softener, bleach or other cleaning products

Rinse the suit thoroughly after washing and allow it to air-dry again.

Usage tips

• Put on a competition suit carefully and step by step
• Do not use sharp fingernails
• Do not pull hard on seams, straps or edges
• Make sure the suit is sitting correctly before moving or diving
• Do not use a competition suit during training
• Take the suit off as soon as possible after use

Competition suits are under high tension. Careless dressing is a common cause of damage.

Lifespan of competition suits

A competition suit has a limited lifespan and is intended for a limited number of races.

The lifespan depends on:

• the type of competition suit
• how often it is worn
• how long it is used each time
• how it is cared for

Intensive or incorrect use can quickly reduce the lifespan. Wear and tear, reduced compression or changes in fit are part of normal use of a competition suit.

Normal wear and tear

The following types of wear and tear may occur with normal use:

• reduced compression
• logos coming loose or fading
• wear to seams or bonded seams
• reduced water-repellent properties

These types of wear and tear are normal and are part of using the product.

Warranty

Competition suits are technical products for regular use and come with a limited warranty.

The warranty covers:

• clear manufacturing defects
• functional defects visible immediately upon first use
• problems with seams or bonded seams that were not caused by use

The warranty does not cover:

• wear and tear caused by use
• damage caused by putting the suit on incorrectly or carelessly
• damage caused by intensive use
• reduced compression
• logos coming loose
• damage caused by inadequate care

When assessing a warranty claim, we consider the age of the competition suit, the condition of the product and clear signs of use and care.

By using a competition suit only for its intended purpose and putting it on and caring for it carefully, the suit will stay in good condition for as long as possible. Wear and tear is normal for this type of product and is part of using it. This information helps set clear expectations about the use, lifespan and warranty of competition suits.

Care, lifespan & warranty of swim caps

Swim caps are used during training and races and come directly into contact with water, chlorine or salt. The material, how the cap is put on and how it is cared for all affect how long it lasts. Below, you’ll find information about the purpose of a swim cap, how to use and care for it, what to expect from its lifespan and how warranty claims are assessed.

Purpose of a swim cap

A swim cap is designed to make swimming more comfortable and practical.

• Keeps the hair together as much as possible while swimming
• Reduces resistance in the water
• Helps keep hair out of the face
• Protects the hair from direct exposure to water and reduces the effect of chlorine or salt, but does not keep the hair dry
• Is required at many swimming pools and races

Caring for swim caps

After each use

• Always rinse the swim cap at home under cold tap water
• This removes chlorine, salt and dirt
• Gently squeeze out the water
• Do not twist or wring the swim cap

Drying

• Gently dry the swim cap with a towel
• Then allow the swim cap to air-dry

Do not leave a swim cap:

• to dry in direct sunlight
• on or beside a radiator
• wet in a closed bag

Heat and prolonged moisture can dry out or weaken the material.

Storing swim caps

• Store the swim cap clean and dry
• Do not place it under heavy items
• Make sure the swim cap is not stored stretched or folded double

For silicone swim caps:

• It helps to keep the swim cap slightly dry
• This prevents the material from sticking to itself

Usage tips

• Put the swim cap on carefully and avoid sharp fingernails
• Do not stretch the swim cap widely before putting it on
• Where possible, pull the swim cap over the ears from the sides
• Do not pull hard on one point of the swim cap

Putting the swim cap on evenly helps prevent concentrated strain on the material.

Lifespan of swim caps

The lifespan of a swim cap varies depending on the material and how it is used.

With normal use, the average lifespan is between 1 month and 2 years. This depends on:

• the material (latex, silicone or fabric)
• how often the swim cap is used
• how the swim cap is put on
• how the swim cap is cared for and stored

Latex swim caps are thinner and more sensitive, and usually have a shorter lifespan than silicone swim caps.

Normal wear and tear

The following types of wear and tear may occur with normal use:

• small tears caused by stretching
• thinning of the material
• loss of elasticity
• discolouration caused by water and use

These types of wear and tear are normal and are part of using the product.

Warranty

Swim caps are products for regular use and come with a limited warranty.

The warranty covers:

• clear manufacturing defects
• tears or damage visible immediately upon first use
• damage that occurs when unpacking the swim cap

The warranty does not cover:

• tears caused by stretching or putting the cap on incorrectly
• damage caused by sharp fingernails
• normal wear and tear
• damage caused by incorrect use or inadequate care

When assessing a warranty claim, we consider the age of the swim cap, the condition of the product and how it has been used and cared for.

By using and caring for your swim cap properly, the material will stay in good condition for longer and you can enjoy it for longer. Wear and tear caused by use is normal and is part of the product. This information helps set clear expectations about the use, lifespan and warranty of swim caps.

Care, lifespan & warranty of training equipment

Training equipment is used during swim training to improve technique, strength and fitness. It includes all the aids used in the water to support training. These products are designed for intensive use, but incorrect use, storage or care can shorten their lifespan. Below, you’ll find information about what training equipment includes, its purpose, how to care for and use it, what to expect from its lifespan and how warranty claims are assessed.

What is included in training equipment

Training equipment includes all aids used during swim training to support specific aspects of swimming. This can range from simple flotation aids to technical training equipment.

Examples of training equipment include:

• kickboards
• pull buoys
• front snorkels
• hand paddles
• swim fins

Other training aids used in the water to train technique, strength or body position are also considered training equipment.

Purpose of training equipment

Training equipment is intended to help you train more effectively.

• Helps improve technique, strength and body position
• Makes it possible to focus on specific parts of the stroke
• Supports muscle groups and body position
• Is used as an aid, not as a substitute for technique

Training equipment is designed for use in the water and not for use outside the training environment.

Caring for training equipment

After each use

• Always rinse your training equipment at home under cold tap water
• This removes chlorine, salt and dirt
• Shake off excess water

Drying

• Allow the training equipment to air-dry
• Make sure the product has good airflow around it

Do not leave training equipment:

• to dry in direct sunlight
• on or beside a radiator
• wet in a closed bag

Heat and prolonged moisture can dry out, deform or weaken the material.

Storing training equipment

• Store the equipment clean and dry
• Do not place heavy items on the product
• Make sure the equipment is not left bent or under tension for long periods
• Store parts such as straps or elastics without tension

Correct storage helps prevent deformation and damage.

Usage tips

• Use training equipment only for its intended purpose
• Do not walk on swim fins
• Do not push off from the wall or starting block while wearing swim fins
• Do not pull hard on elastics, straps or attachments
• Use hand paddles with the correct technique and guidance
• Use front snorkels without forcing any moving parts

Damage is often caused by concentrated strain or incorrect use.

Lifespan of training equipment

Training equipment is generally more resistant to water than textile products, but these products also have a limited lifespan.

With normal use, the lifespan is usually longer than that of swimwear or swimming goggles. The exact lifespan depends on:

• the type of product
• the material used
• how often it is used
• how the product is cared for and stored

Elastics, straps and moving parts are more susceptible to wear and tear than fixed components.

Normal wear and tear

The following types of wear and tear may occur with normal use:

• slight deformation of the material
• reduced elasticity of straps
• surface damage
• discolouration caused by water and use

These types of wear and tear are normal and are part of using the product.

Warranty

Training equipment is a product for regular use and comes with a limited warranty.

The warranty covers:

• clear manufacturing defects
• breaks or tears that occur during normal use
• defects visible immediately upon first use

The warranty does not cover:

• damage caused by incorrect use
• damage caused by walking on swim fins
• damage caused by pushing off from the wall or starting block
• damage caused by pulling or forcing components
• normal wear and tear

When assessing a warranty claim, we consider the age of the product, the condition of the material and how the product has been used and cared for.

By using and caring for training equipment properly, it will stay in good condition for longer and you can train safely and effectively with it. Wear and tear caused by use is normal and is part of the product. This information helps set clear expectations about the use, lifespan and warranty of training equipment.

Care, lifespan & warranty of bags

Swim bags are used to carry swimwear, training equipment and personal belongings. They often become wet, carry heavy loads and are used intensively. How a bag is packed, carried and cared for has a major effect on its lifespan. Below, you’ll find information about the purpose of a swim bag, how to use and care for it, what to expect from its lifespan and how warranty claims are assessed.

Purpose of bags

A swim bag is designed to carry swimming gear safely and practically.

• Provides space for swimwear, towels and accessories
• Makes it possible to carry wet and dry items
• Helps keep belongings organised
• Designed for carrying and transport, not heavy or prolonged overloading

A swim bag is not intended for storing wet items for long periods or for carrying more than it was designed to hold.

Caring for bags

After use

• Take wet items out of the bag as soon as possible
• Leave the bag fully open so it can air
• Wipe the inside dry if necessary

Cleaning

• Clean the bag only when necessary
• Use a damp cloth and mild cleaning product
• Do not rinse with large amounts of water or submerge the bag

Do not leave a bag:

• closed and wet for long periods
• to dry in direct sunlight
• on or beside a radiator
• in the tumble dryer

Heat and moisture can damage materials, coatings and stitching.

Storing bags

• Store the bag dry and empty
• Make sure the zips are not under tension
• Store the bag without heavy items on top

Correct storage helps prevent deformation and damage to zips and seams.

Usage tips

• Do not fill the bag more than necessary
• Distribute the weight evenly
• Open and close zips carefully
• Do not force zips when the bag is full
• Use separate compartments for wet and dry items where available

Zips and seams are the most sensitive parts of a bag. Overloading creates extra tension and increases the risk of damage.

Lifespan of bags

With normal use, you can expect a swim bag to last for at least several months and potentially longer. The exact lifespan depends on:

• how often the bag is used
• how heavily the bag is loaded
• how often the bag becomes wet
• how the bag is cared for and stored

Intensive use and repeated overloading can significantly shorten the lifespan.

Normal wear and tear

The following types of wear and tear may occur with normal use:

• wear to the fabric
• discolouration caused by water and use
• zips becoming smoother or more difficult to operate
• slight damage to corners or edges

These types of wear and tear are normal and are part of using the product.

Warranty

Bags are products for regular use and come with a limited warranty.

The warranty covers:

• clear manufacturing defects
• defects visible immediately upon first use

The warranty does not cover:

• damage caused by overloading
• damage to zips caused by an overfilled bag
• seams tearing due to tension
• wear and tear caused by intensive use
• damage caused by inadequate care

When assessing a warranty claim, we consider the age of the bag, the condition of the product and how the bag has been used and cared for.

By not overloading your bag, removing wet items promptly and allowing the bag to air properly, it will stay in good condition for longer. Wear and tear caused by use is normal and is part of the product. This information helps set clear expectations about the use, lifespan and warranty of bags.

Care, lifespan & warranty of pool slides, flip flops & water shoes

Pool slides, flip flops and water shoes are used in and around water, as well as for everyday use. They provide comfort, grip and protection, but are often exposed to water, sand, salt, heat and friction. How these products are used and cared for affects how long they last. Below, you’ll find information about their purpose, how to use and care for them, what to expect from their lifespan and how warranty claims are assessed.

Purpose of pool slides, flip flops & water shoes

These products are designed for comfort and protection in wet environments and for light everyday use.

Pool slides and flip flops:

• Suitable for use at the swimming pool, in wet areas and outdoors
• Provide comfort when walking normally
• Protect the feet from wet or rough surfaces
• Not intended to replace sports shoes

Water shoes:

• Protect the feet from sharp stones, shells and rough surfaces
• Provide extra grip on wet and slippery surfaces
• Suitable for use in and around water
• Not intended for prolonged walking or intensive use on dry ground

Caring for pool slides, flip flops & water shoes

After use

• Always rinse the product at home with cold tap water
• This removes chlorine, salt, sand and dirt
• Check water shoes to make sure no sand or small stones remain inside

Drying

• Allow the product to air-dry
• Place it somewhere well ventilated

Do not leave pool slides, flip flops or water shoes:

• to dry in direct sunlight
• on or beside a radiator
• in the tumble dryer

Heat can cause deformation, hardening or parts coming loose.

Storage

• Store the product clean and dry
• Do not place it under heavy items
• Make sure it is not compressed for long periods

Correct storage helps preserve the shape, fit and grip.

Usage tips

• Use the product for its intended purpose
• Avoid running, jumping or intensive use
• Avoid walking for long periods on rough, dry surfaces
• Put the product on and take it off carefully
• Rinse water shoes immediately after use in the sea or on the beach

Using the product outside its intended environment can cause faster wear to the sole and upper material.

Lifespan

With normal use, you can expect pool slides, flip flops and water shoes to last for several months and potentially longer. The exact lifespan depends on:

• how often they are used
• the surfaces they are worn on
• exposure to water, sand and salt
• how they are cared for and stored

Wear to the sole, strap or upper material is normal with use.

Normal wear and tear

The following types of wear and tear may occur with normal use:

• wear to the sole
• reduced tread or grip
• slight deformation of straps or material
• discolouration caused by water, sunlight and use

These types of wear and tear are normal and are part of using the product.

Warranty

Pool slides, flip flops and water shoes are products for regular use and come with a limited warranty.

The warranty covers:

• clear manufacturing defects
• parts coming loose during normal use
• defects visible immediately upon first use

The warranty does not cover:

• normal wear and tear
• damage caused by intensive or incorrect use
• damage caused by use on rough, dry surfaces
• damage caused by deformation due to heat
• fit or comfort concerns

When assessing a warranty claim, we consider the age of the product, its condition and how it has been used and cared for.

By using pool slides, flip flops and water shoes correctly, rinsing them thoroughly and allowing them to dry properly, they will remain comfortable and safe to use for longer. Wear and tear caused by use is normal and is part of the product. This information helps set clear expectations about use, lifespan and warranty.