Maintenance, lifespan & warranty of swimwear

Swimwear for active swimming is used intensively. Water, chlorine or salt, friction, and body fluids all affect the fabric and its elasticity. Therefore, proper maintenance is important, and it's good to know what to expect from the lifespan of your swimwear. On this page, we explain how to best care for your swimwear, its average lifespan, and how warranties are assessed.

Swimwear maintenance

Proper maintenance helps you enjoy your swimwear for as long as possible.

After each use

Always rinse your swimwear at home under cold tap water . This removes chlorine, salt, and body fluid residue. Gently squeeze out the water and do not wring the fabric.

Drying

Let your swimwear air dry in a warm room .

Do not let swimwear dry:

• in direct sunlight
• over or on a heater
• in the dryer
  
  

Heat damages the elasticity and the fabric and shortens its lifespan.

Washing swimwear

Washing is usually not necessary and should only be done when absolutely necessary.

• Do not wash swimwear in the washing machine
• Always wash by hand
• Use lukewarm water
• Use a mild, non-aggressive detergent
• Do not use bleach or strong detergents
  
  

After washing, rinse the swimwear well and let it air dry again.

Usage tips

With proper use, your swimwear will stay beautiful for longer.

• Put on your swimwear calmly and avoid sharp nails
• Avoid friction with rough surfaces such as pool edges and starting blocks
• Do not use sporty swimwear for water slides or hot tubs
• Do not wear swimwear under regular clothing
• Do not leave wet swimwear in a bag or towel for long periods of time
• Alternate swimwear if you swim several times a week
  
  

Lifespan of swimwear

Swimwear is made of elastic materials that are suitable for swimming, but are sensitive to external influences.

For sports use, the average lifespan is between about 3 months and 1 year . This depends on factors such as:

• how often you swim
• the type of water (chlorine or salt)
• how well you rinse your swimwear
• how to dry and store swimwear
• the amount of friction during wearing
  
  

Lifespan of water polo swimwear

Water polo is a contact sport where swimwear is pulled hard during training and matches, putting constant tension on the fabric and seams.

The lifespan of water polo swimwear is therefore often shorter than that of regular swimming . Wear and tear due to pulling, stretching, and tearing is a natural part of the sport and cannot be completely prevented, even with proper maintenance.

Normal wear and tear

The following types of wear and tear may occur during normal use:

• pills (small balls on the fabric)
• thinning of the fabric, sometimes visible as light spots
• discoloration due to water, sun, sunscreen, or body substances
• peeling or fading of prints
  
  

These forms of wear and tear are associated with use and are normal.

Warranty

Swimwear is a consumable product and has a limited warranty .

Warranty applies to:

• obvious manufacturing defects
• problems that are immediately visible upon first use

Warranty does not apply to:

• normal wear and tear
• discoloration or pilling
• thinning of the fabric
• damage due to pulling or tearing during water polo
• damage due to improper use
• damage due to insufficient maintenance
  
  

A warranty assessment takes into account the age of the product, the condition of the swimwear, and how it has been used and maintained.

By properly caring for your swimwear and using it correctly, you can extend its lifespan and enjoy it for longer. Wear and tear is normal during sports use and is a natural part of the product. This information helps provide clear expectations and answers to questions about maintenance, lifespan, and warranty.

Maintenance, lifespan & warranty of swimming goggles

Swimming goggles are used intensively and come into direct contact with water, chlorine or salt, sunlight, and temperature fluctuations. The fit and how they are used and stored also affect how long they last. This page explains how to best care for your swimming goggles, what you can expect in terms of lifespan, and how the warranty is assessed.

Maintenance of swimming goggles

After each use

• Always rinse your swimming goggles at home under cold tap water
• Rinse only the outside of the lenses and frame
• Try not to get the inside of the lenses wet
• This removes residues of chlorine, salt and dirt
• Gently shake off excess water from the glasses
• Touch the inside of the lenses as little as possible to protect the coating.

Drying

• Let the swimming goggles air dry
• Lay the glasses down or hang them up so that the lenses can dry freely

Do not let swimming goggles:

• dry in direct sunlight
• lie on or near a heater
• lie wet in a closed bag

Heat and prolonged moisture can damage the lenses, coating and seal.

Storage of swimming goggles

• Preferably store your swimming goggles in a protective goggle case
• Make sure the seal is not crushed
• Do not place heavy objects on the swimming goggles
• Don't leave your goggles loose in a bag

This helps to prevent scratches and deformation.

Usage tips

• Do not overtighten the goggles; a good fit ensures a tight seal without too much tension
• Do not pull hard on the straps or nose bridge
• Do not throw the swimming goggles on the pool edge or floor
• Use only water or suitable sprays for the lenses
• Do not rub the inside of the lens

Are your goggles starting to fog up?

• Do not throw away the swimming goggles immediately
• You can often apply a new layer with an anti-fog spray
• The effect of an anti-fog spray is temporary
• An anti-fog spray does not completely restore the original coating
• How long the effect lasts depends on use and maintenance

Are swimming goggles leaking?

• This is usually the result of a fit that does not fit the face properly.
• This is not a defect of the swimming goggles

Lifespan of swimming goggles

Swimming goggles are a technical product with multiple components such as lenses, seals, straps and adjustment systems.

With normal sports use, the average lifespan is between about 3 months and 1 year. This depends on:

• how often you swim
• how to maintain swimming goggles
• how to store swimming goggles
• exposure to sun and heat

Over time, the seal may become less effective or the coating may become less effective. This is normal use.

Normal wear and tear

The following forms of wear and tear may occur during normal use:

• scratches on the lenses
• reduced effectiveness of the coating
• stretching straps
• slight discoloration of parts

These symptoms are associated with use and are normal.

Warranty

Swimming goggles are consumable products and have a limited warranty.

Warranty applies to:

• obvious manufacturing defects
• problems that are immediately visible upon first use
• a non-functioning adjustment system
• loose lenses
• a defective coating
• breaking the frame

Warranty does not apply to:

• normal wear and tear such as scratches on the lens
• leakage due to an improper fit
• damage due to careless use
• damage due to incorrect storage
• problems caused by rubbing the lens
• damage from exposure to heat

A warranty assessment takes into account the age of the goggles, the condition of the product, and how it has been used and maintained.

Maintenance, lifespan & warranty of competition suits

Competition suits are technical swimming products designed for competitive performance. They are made of specialized materials that support compression, hydrodynamics, and freedom of movement. These suits are not intended for daily or long-term use . How you use, put on, and care for a competition suit significantly impacts its lifespan. Below, you'll learn about the purpose of competition suits, how best to use and care for them, what you can expect in terms of lifespan, and how warranties are assessed.

Purpose of competition suits

Competition suits are designed to support performance in competitions.

• Reduce water resistance
• Provides compression for a streamlined posture
• Support muscles during maximum exertion
• Designed for competitions and selective moments, not for training

A competition suit is not a substitute for technique and is not intended to be worn frequently or for long periods of time.

Maintenance of competition suits

After each use

• Always rinse the competition suit at home under cold tap water
• Rinse the suit thoroughly to remove any residue of chlorine, salt and body substances
• Gently squeeze out the water
• Do not wring or twist the suit

Drying

• Lay the competition suit flat or hang it up carefully
• Let the suit air dry in a warm place

Don't let a competition suit:

• dry in direct sunlight
• lie on or near a heater
• in the dryer
• lie wet in a closed bag

Heat and prolonged moisture damage the fabric, adhesive bonds and elasticity.

Washing competition suits

In principle, washing is not necessary.

• Do not wash a competition suit in the washing machine
• Only wash by hand if absolutely necessary
• Use cold to lukewarm water
• Use a mild, non-aggressive detergent
• Do not use fabric softener, bleach or other cleaners

After washing, rinse the suit well and let it air dry again.

Usage tips

• Put on a competition suit slowly and step by step
• Do not use sharp nails
• Do not pull hard on seams, bands or edges
• Make sure the suit is properly up before moving or jumping
• Do not use a competition suit during training
• Take off the suit as soon as possible after use

Competition uniforms are under high tension. Careless donning is a common cause of damage.

Lifespan of competition suits

A competition suit has a limited lifespan and is intended for a limited number of competitions.

The lifespan depends on:

• the type of competition suit
• how often it is worn
• how long it is used at a time
• how it is maintained

Intensive or improper use can quickly reduce the lifespan. Wear and tear, reduced compression, and changes in fit are all normal part of a competition suit's lifespan.

Normal wear and tear

The following forms of wear and tear may occur during normal use:

• decrease in compression
• peeling or fading of logos
• wear of seams or glue joints
• reduced water-repellent properties

These forms of wear and tear are associated with use and are normal.

Warranty

Competition suits are technical consumer products and have a limited warranty.

Warranty applies to:

• obvious manufacturing defects
• functional defects that are immediately visible upon first use
• problems with seams or glue joints that have not arisen through use

Warranty does not apply to:

• wear and tear through use
• damage due to incorrect or careless tightening
• damage due to intensive use
• decrease in compression
• releasing logos
• damage due to insufficient maintenance

A warranty assessment will take into account the age of the competition suit, the condition of the product, and clear signs of use and maintenance.

By using a competition suit only for its intended purpose and by carefully fitting and maintaining it, it will remain in good condition for as long as possible. Wear and tear is normal for this type of product and is part of its use. This information helps provide clear expectations regarding the use, lifespan, and warranty of competition suits.

Maintenance, lifespan & warranty of swimming caps

Swimming caps are used during training and competitions and come into direct contact with water, chlorine, or salt. The material, the way they're put on, and the care they take all influence how long a swimming cap lasts. Below, you'll find information about the purpose of a swimming cap, how best to use and care for it, what you can expect in terms of lifespan, and how the warranty is assessed.

Purpose of a swimming cap

A swimming cap is intended to make swimming more comfortable and practical.

• Keep your hair together as much as possible while swimming
• Ensures less resistance in the water
• Helps keep hair out of the face
• Protects the hair from direct exposure to water and reduces the effects of chlorine or salt, but does not keep the hair dry.
• Mandatory in many swimming pools and competitions

Maintenance of swimming caps

After each use

• Always rinse the swimming cap at home under cold tap water
• This removes residues of chlorine, salt and dirt
• Gently squeeze out the water
• Do not twist or wring the swimming cap

Drying

• Dry the bathing cap carefully with a towel
• Then let the swimming cap air dry

Do not leave a bathing cap:

• dry in direct sunlight
• lie on or near a heater
• lie wet in a closed bag

Heat and prolonged moisture can dry out or weaken the material.

Storage of bathing caps

• Store the swimming cap dry and clean.
• Do not place the swimming cap under heavy objects
• Make sure the swimming cap is not stored tightly or folded.

For silicone swimming caps:

• It helps to keep the swimming cap slightly dry
• This prevents the material from sticking to itself

Usage tips

• Put on the bathing cap gently and avoid sharp nails
• Do not pull the swimming cap too far apart before putting it on
• Preferably place the swimming cap over the ears at the sides
• Do not pull hard on one point of the swimming cap

By putting the swimming cap on evenly, you prevent peak loads on the material.

Lifespan of swimming caps

The lifespan of a swimming cap varies depending on material and use.

With normal use, the average lifespan is between one month and two years . This depends on:

• the material (latex, silicone or fabric)
• how often the swimming cap is used
• how to put on the swimming cap
• how to maintain and store the swimming cap

Latex swim caps are thinner and more delicate and usually have a shorter lifespan than silicone swim caps.

Normal wear and tear

The following forms of wear and tear may occur during normal use:

• small cracks due to stretching
• thinning of the material
• loss of elasticity
• discoloration due to water and use

These forms of wear and tear are associated with use and are normal.

Warranty

Swimming caps are consumable products and have a limited warranty.

Warranty applies to:

• obvious manufacturing defects
• cracks or damage that are immediately visible upon first use
• damage that occurs when unpacking the swimming cap

Warranty does not apply to:

• tearing due to stretching or incorrect fitting
• damage caused by sharp nails
• normal wear and tear
• damage due to improper use or insufficient maintenance

A warranty assessment will take into account the age of the swimming cap, the condition of the product, and how it has been used and maintained.

By using and maintaining your swim cap correctly, the material will stay in good condition for longer, allowing you to enjoy it for longer. Wear and tear from use is normal and a natural part of the product. This information helps provide clear expectations regarding the use, lifespan, and warranty of swim caps.

Maintenance, lifespan & warranty of training equipment

Training equipment is used during swimming training to improve technique, strength, and fitness. This includes all equipment used in the water to support training. These products are designed for intensive use, but improper use, storage, or maintenance can shorten their lifespan. Below, you'll find information about what constitutes training equipment, its purpose, how to best maintain and use it, what you can expect in terms of lifespan, and how the warranty is assessed.

What is included in training materials?

Training equipment includes all the tools used during swimming training to support specific aspects of swimming. This can range from simple buoyancy aids to technical training aids.

Examples of training materials include:

• kickboards
• pull buoys
• snorkels
• paddles
• webbed feet

Other training aids used in the water to train technique, strength or posture are also considered training equipment.

Purpose of training materials

Training materials are intended to enable more targeted training.

• Helps improve technique, strength and posture
• Allows you to train specific parts of the swimming stroke
• Supports muscle groups and body position
• Used as an aid, not a replacement for technology

Training equipment is designed for use in water and not for use outside of a training situation.

Maintenance of training equipment

After each use

• Always rinse the training equipment at home under cold tap water
• This removes residues of chlorine, salt and dirt
• Shake off excess water

Drying

• Let the training equipment air dry
• Make sure the product can air freely

Do not leave training equipment:

• dry in direct sunlight
• lie on or near a heater
• lie wet in a closed bag

Heat and prolonged moisture can dry out, warp or weaken the material.

Storage of training materials

• Store the material dry and clean
• Do not place heavy objects on the product
• Make sure the material is not bent or under tension for long periods of time
• Store parts such as straps or elastics without tension

Correct storage helps prevent deformation and damage.

Usage tips

• Use training equipment only for its intended purpose
• Don't walk on fins
• Do not push off from the wall or starting block with fins
• Do not pull hard on elastics, straps or fasteners
• Use paddles with proper technique and guidance
• Use snorkels without forcing moving parts

Damage is often caused by peak loads or incorrect use.

Lifespan of training materials

Training equipment is generally more resistant to water than textile products, but these products also have a limited lifespan.

With normal use, the lifespan is usually longer than that of swimwear or goggles . The exact lifespan depends on:

• the type of product
• the material used
• how often it is used
• how the product is maintained and stored

Elastics, straps and moving parts are more susceptible to wear than fixed parts.

Normal wear and tear

The following forms of wear and tear may occur during normal use:

• slight deformation of the material
• reduced elasticity of straps
• superficial damage
• discoloration due to water and use

These forms of wear and tear are associated with use and are normal.

Warranty

Training equipment is a consumable product and has a limited warranty.

Warranty applies to:

• obvious manufacturing defects
• breaks or cracks that occur during normal use
• defects that are immediately visible upon first use

Warranty does not apply to:

• damage due to improper use
• damage from walking on fins
• damage caused by pushing against the wall or starting block
• damage caused by pulling or forcing parts
• normal wear and tear

A warranty assessment takes into account the age of the product, the condition of the materials, and how the product has been used and maintained.

By using and maintaining training equipment correctly, it will stay in good condition for longer, allowing you to train safely and effectively. Wear and tear from use is normal and a natural part of the product. This information helps provide clear expectations regarding the use, lifespan, and warranty of training equipment.

Maintenance, lifespan & warranty of bags

Swim bags are used to transport swimwear, training equipment, and personal belongings. They often get wet, get heavily loaded, and get used intensively. The way they're loaded, carried, and maintained significantly impacts their lifespan. Below, you'll find information about the purpose of a swim bag, how to best use and maintain it, what you can expect in terms of lifespan, and how the warranty is assessed.

Purpose of bags

A swimming bag is intended to transport swimming gear in a practical and safe manner.

• Provides space for swimwear, towels and accessories
• Allows you to take wet and dry items
• Helps keep things organized
• Designed for carrying and transport, not for heavy or prolonged overloading

A swim bag is not a means of storing wet gear for long periods of time and is not intended to carry more than the bag is designed for.

Bag maintenance

After use

• Remove wet items from the bag as quickly as possible
• Leave the bag completely open so that it can air out.
• Wipe the inside dry if necessary

Cleaning

• Clean the bag only when necessary
• Use a damp cloth and mild detergent
• Do not rinse with plenty of water and do not immerse the bag

Do not leave a bag:

• lying wet closed for long periods
• dry in direct sunlight
• lie on or near a heater
• in the dryer

Heat and moisture can damage materials, coatings and stitching.

Storage of bags

• Store the bag dry and empty
• Make sure zippers are not under tension
• Store the bag without heavy items on it

Correct storage prevents deformation and damage to zippers and seams.

Usage tips

• Do not fill the bag more than necessary
• Distribute the weight evenly
• Open and close zippers gently
• Do not force zippers when the bag is full
• Use separate compartments for wet and dry items if available

Zippers and seams are the most sensitive parts of a bag. Overloading them creates extra tension and increases the risk of damage.

Lifespan of bags

With normal use, you can expect a swim bag to last at least a few months, or even longer . The exact lifespan depends on:

• how often the bag is used
• how heavy the bag is loaded
• how wet the bag regularly gets
• how the bag is maintained and stored

Intensive use and structural overload can significantly shorten the lifespan.

Normal wear and tear

The following forms of wear and tear may occur during normal use:

• wear and tear of the fabric
• discoloration due to water and use
• smoother or heavier running zippers
• minor damage to corners or edges

These forms of wear and tear are associated with use and are normal.

Warranty

Bags are consumable products and have a limited warranty.

Warranty applies to:

• obvious manufacturing defects
• defects that are immediately visible upon first use

Warranty does not apply to:

• damage due to overload
• damage to zippers due to an overfull bag
• torn seams due to tension
• wear and tear due to intensive use
• damage due to insufficient maintenance

A warranty assessment takes into account the age of the bag, the condition of the product, and how the bag has been used and maintained.

By not overloading your bag, removing wet items promptly, and airing it out thoroughly, you'll keep it in good condition for longer. Wear and tear from use is normal and part of the product's characteristics. This information helps provide clear expectations regarding bag use, lifespan, and warranty.

Maintenance, lifespan & warranty of slippers, flip flops & water shoes

Flip-flops, sandals, and water shoes are used in and around water and for general everyday use. They offer comfort, grip, and protection, but are often exposed to water, sand, salt, heat, and friction. How they are used and maintained affects how long these products last. Below, you'll find information about the purpose of these products, how best to use and care for them, what you can expect in terms of lifespan, and how warranties are assessed.

Purpose of slippers, flip flops & water shoes

These products are designed for comfort and protection in wet environments and light everyday use.

Slippers and flip flops:

• Suitable for use at the pool, in wet areas and outdoors
• Provides comfort during normal walking
• Protect feet from wet or rough surfaces
• Not intended as a replacement for athletic shoes

Water shoes:

• Protect feet from sharp stones, shells and rough surfaces
• Provides extra grip on wet and slippery surfaces
• Suitable for use in and around water
• Not intended for prolonged walking or intensive use on dry surfaces.

Maintenance of slippers, flip flops & water shoes

After use

• Always rinse the product at home with cold tap water
• This removes chlorine, salt, sand and dirt
• Check that no sand or pebbles remain on water shoes

Drying

• Allow the product to air dry
• Place it in a well-ventilated place

Do not leave slippers, flip flops and water shoes:

• dry in direct sunlight
• lie on or near a heater
• in the dryer

Heat can cause warping, hardening or loosening of parts.

Storage

• Store the product dry and clean
• Do not place it under heavy objects
• Make sure it is not compressed for long periods of time

Proper storage helps maintain shape, fit and grip.

Usage tips

• Use the product for its intended purpose
• Avoid running, jumping or intensive use
• Avoid prolonged walking on rough, dry surfaces
• Put the product on and take it off slowly
• Rinse water shoes immediately after use in the sea or on the beach

Use outside of the intended environment may cause faster wear of the sole and upper.

Lifespan

With normal use, you can expect flip-flops, sandals, and water shoes to last several months or longer . The exact lifespan depends on:

• how often they are used
• on which surfaces they are worn
• exposure to water, sand and salt
• how they are maintained and stored

Wear and tear of the sole, strap or upper material is normal with use.

Normal wear and tear

The following forms of wear and tear may occur during normal use:

• wear and tear of the sole
• less profile or grip
• slight deformation of tires or material
• discoloration due to water, sun and use

These forms of wear and tear are associated with use and are normal.

Warranty

Slippers, flip flops and water shoes are consumables and have a limited warranty.

Warranty applies to:

• obvious manufacturing defects
• loosening of parts during normal use
• defects that are immediately visible upon first use

Warranty does not apply to:

• normal wear and tear
• damage due to intensive or incorrect use
• damage from use on rough, dry surfaces
• damage due to heat deformation
• fit or comfort complaints

A warranty assessment takes into account the age of the product, its condition, and how it has been used and maintained.

By using flip-flops, sandals, and water shoes correctly, rinsing them thoroughly, and drying them properly, they will remain comfortable and safe to wear for longer. Wear and tear from use is normal and part of the product's nature. This information helps provide clear expectations regarding use, lifespan, and warranty.